Other
Part of: 721590 — Other:
N314806 · 2020-09-30 — The tariff classification and country of origin marking of plastic coated wire from China
Representative photos of the subject wire and its proposed method of marking were submitted with your request. The merchandise under consideration is cut lengths of steel wire. Measuring 5 inches long and having a diameter of 1.8 millimeters, this carbon steel wire has a green plastic coating. According to the photos, the wire is packaged in clear polybags and the outer cardboard boxes/cartons will be marked with the country of origin. You indicate that this wire is used to secure candles within flower/plant arrangements in an inconspicuous manner. Chapter 72, Note 1(o) dictates that wire…
N307065 · 2019-11-12 — The tariff classification of steel bars from Italy
The products to be imported, identified as 12.8L and 14.8L Engine Exhaust axles, are cut-to-length cold-drawn steel bars which will ultimately be used in diesel engines. Comprised of carbon (0.42% – 0.5%), silicon (max 0.4%), manganese (0.5% – 0.8%), nickel (max 0.4%), phosphorous (0.03%), sulfur (max 0.035%), chromium (max 0.4%) and molybdenum (max 0.1%), these bars measure 36.2 mm in diameter, have chamfered ends and a 7 mm drill hole on one end. After importation, the “axles” will undergo considerable further working such as drilling, deburring, case hardening, straightening, centerless…
N281132 · 2016-11-16 — N279517 Correction of a clerical error; the tariff classification of pre-cut tiewire from China
This replaces Ruling Number N279517, dated October 14, 2016, which contained a typographical error involving the HTSUS number referenced in the ruling heading for pre-cut tiewire. The tariff number which should have been cited in the ruling heading was 7215.90.5000 as shown corrected above. The body of the ruling, with the exception of the heading, is correct as originally issued and appears below. In your letter dated July 25, 2016, you requested a tariff classification ruling. Descriptive literature, photos and samples of the pre-cut tiewire were submitted for our review. The subject…
N041123 · 2008-10-21 — The tariff classification of steel wire from China.
Representative samples were submitted with your request. The product to be imported is cut-to-length painted nonalloy steel wire. Available in thicknesses of 14.5, 13, 12 or 11.5 gauge, this wire is used in a variety of applications including the manufacture of wire hangers. The applicable subheading for the steel wire will be 7215.90.5000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other bars and rods of iron or nonalloy steel, other, other. The rate of duty will be free. Duty rates are provided for your convenience and are subject to change. The text of the…
I83738 · 2002-07-15 — The tariff classification of clad steel from China.
A.S. Iberia, Inc., you requested a tariff classification ruling. A representative sample of the product to be imported was submitted with your request. The product to be imported is known generically as “Damascus Steel” and is a clad product consisting of fused layers of two different grades carbon steel (Grades 1095 and 1030). Although this product may also be made of fused layers of carbon steel and alloy steel or carbon steel and nickel, you only request a ruling on the product consisting of two different grades of carbon steel. To produce Damascus steel, the two components or substrates…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product