7216 69 00 00

Code

7216 69 00 00

Type

10-digit tariff line

Duty rate

Free

Unit

kg

Classification rulings (U.S. Customs, CROSS)

• N303481 · 2019-04-12 — The tariff classification of steel profiles from Germany

  Representative samples were submitted with your request and will be returned to you under separate cover. The products under consideration are described as L-shaped nonalloy steel profiles used in the manufacture of automotive sealing rings. Produced from hot-rolled wire rod, you state that these profiles are cold-rolled and annealed to shape, then hardened and tempered. The applicable subheading for the profiles will be 7216.69.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Angles, shapes and sections of iron or nonalloy steel: Angles, shapes and sections,…

• I88455 · 2002-12-15 — The tariff classification of steel profile material from Germany.

  A sample that is a piece of the product to be imported was submitted with your request. The product to be imported is a steel profile shape that will ultimately be made into auto seat guides. The profile shape, made of Grade 1018 nonalloy steel, is made by hot extruding the steel to form the customer’s proprietary shape and then cold-drawing the shape to impart the tolerance, straightness and finish required by the customer. This profile shape, which has a cross-sectional configuration in the form of a modified channel, is imported in material lengths. After importation, the profile shape is…

• I82831 · 2002-07-01 — The tariff classification of steel T-Bars from the Netherlands.

  Photos and descriptive literature were submitted with your request. The product to be imported is a cold-drawn carbon steel T-Bar which will ultimately be incorporated into a fork clamp assembly. In its imported condition, the T-Bar is cut-to-length and the edges are chamfered. You suggest that this product is classifiable as a part under HTS heading 8431. However, as imported, the T-bar is not recognizable as a part of a fork clamp solely or principally used as such. The applicable subheading for the cold-drawn carbon steel T-bar will be 7216.69.0000, Harmonized Tariff Schedule of the United…

• i80237 · 2002-04-22 — The tariff classification of steel profile material from Germany.

  The products to be imported are steel profile shapes. The profile shapes are made of various grades of carbon (nonalloy) steel. Drawings depicting the cross-sectional shapes of ten different profiles were submitted with your request. The profiles are designated by the following numbers: 3393, 3397, 3437, 3456, 3458, 3465, 5092, 5188, 5555 and 74308. You state that these profile shapes are produced by hot-rolling, hot-extruding and/or cold drawing. These steel profile shapes will be imported in material lengths. After importation, the profile material will be cut to the size required by the…

• c80202 · 1998-04-07 — The tariff classification of linear slides from Italy

  The items in question are identified as "Uniline" linear units, "S" and "AS" series slides, "heavy duty" telescopic rails, "CSW" sliders, and track rails. The slide units are designed to accommodate the linear movement of components in a wide range of industrial applications. The "Uniline" linear unit is a positioning device which consists of a trolley, slider, guide rail and drive mechanism. The drive mechanism is a toothed belt and pulley, mechanically linked to the slider. The slider consists of four radial bearings, which serve as rollers, and rolls along the guide rail driven by the…

• 72161000 — U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
• 7216 21 00 00 — L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: — L sections
• 7216 22 00 00 — L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: — T sections
• 7216 31 00 00 — U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: — U sections
• 7216 32 00 00 — U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: — I sections (standard beams)
• 72163300 — U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: — H sections
• 72164000 — L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
• 7216 50 00 00 — Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
• 7216 61 00 00 — Angles, shapes and sections, not further worked than cold-formed or cold-finished: — Obtained from flat-rolled products
• 72169100 — Other: — Cold-formed or cold-finished from flat-rolled products
• 72169900 — Other: — Other

• 7216 69 00 00 — ТН ВЭД ЕАЭС: прочие
• 721669 — EU CN/TARIC: Angles, shapes and sections, not further worked than cold-formed or cold-finished — Other

Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.