Other: — Containing more than 0.5 percent by weight of nickel: — Other
Part of: 72199000 — Other
N300158 · 2018-09-18 — The tariff classification of polished stainless steel sheet from China
The product to be imported is polished Grade 304 stainless steel sheet. This cold-rolled, cut-to-length sheet ranges in size from 4’ X 8’ to 4’ X 12’ and from 14 – 22 gauge in thickness. The sheet is available in various colors and has a nickel content ranging from 8 – 10%. After importation, it will be made into finished products such as store fronts, elevators and column covers. The applicable subheading for the polished stainless steel sheet will be 7219.90.0025, Harmonized Tariff Schedule of the United States (HTSUS), which provides for flat-rolled products of stainless steel, of a width…
I81231 · 2002-05-16 — The tariff classification of stainless steel sheets from Taiwan.
The products to be imported are Type 304 stainless steel sheets made to ASTM Specifications A 240 and A 480. ASTM Spec A 240 is the Standard Specification for Heat-Resisting Chromium and Chromium–Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels. ASTM Spec A 480 is the Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip. The products range from approximately 0.5 mm to 3 mm in thickness and measure either 48 inches or 60 inches in width. These sheets have either a No. 2B finish, which is a cold-rolled…
h87071 · 2002-02-04 — The tariff classification of copper plated stainless steel from Korea.
and SK Global America, Inc., you requested a tariff classification ruling. Descriptive literature and a representative sample of the product to be imported were submitted with your request. The product to be imported is electrolytic copper-plated flat-rolled stainless steel marketed under the name “SUSCOP”. The substrate, Type 304 cold-rolled stainless steel, is coated with two layers, a nickel layer and a copper layer on the surface. SUSCOP flat-rolled steel ranges from 0.30 mm to 1.00 mm in thickness and up to 1000 mm in width. It will be imported either in coil form or in lengths ranging…
f82029 · 2000-02-08 — The tariff classification of perforated flat-rolled stainless steel from Japan.
A representative sample of the product to be imported was submitted with your request. Perforated flat-rolled Type 304 stainless steel having a 2B cold-rolled finish will be imported both in coil form and cut-to-length. This product measures 0.3 mm in thickness. The coils measure 500 mm in width and the cut-to-length sheets will be imported in various sizes not over five feet in width and ten feet in length. You state that the perforations measure 0.5 mm in diameter and there are 625 holes per square inch. This perforated steel will ultimately be used in the agricultural field in sugar…
E81671 · 1999-05-14 — The tariff classification of stainless steel sheets from Japan.
, you requested a tariff classification ruling. The products to be imported are Type 304 stainless steel sheets with a No. 8 polished mirror finish on one or both surfaces. The sheets will be covered with double-strength PVC to protect the surfaces. The sheets will be imported in thicknesses ranging from 0.6 mm to 3.0 mm and in various widths and lengths. The five most common sizes are: 25 inches x 55 inches, 28 inches x 63 inches, 30 inches x 69 inches, 50 inches x 100 inches and 48 inches x 120 inches. The sheets will be ultimately used as architectural material and may also be used for CP…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product