Other: — Other: — Other
Part of: 72199000 — Other
N350709 · 2025-07-08 — The country of origin of cold-rolled stainless steel sheet
The product to be imported is a polished and coated Grade 430 stainless steel sheet. This cold-rolled, cut-to-length sheet measures 0.9 mm in thickness, 1219 mm in width, and 3048 mm in length. A polyvinyl chloride (PVC) coating is applied to protect the surface finish. The sheet is made to ASTM A240 and will be used in the production of end-use products such as appliances or outdoor grills. Flat-rolled products are defined in Chapter 72, Note 1(k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which if of a thickness less than 4.75…
H327731 · 2025-06-09 — Protest No. 4601-22-131915; Classification of lamination press plates
This is our decision regarding an Application for Further Review (“AFR”) of Protest No. 4601-22-131915, filed on behalf of Cardel Ltd. (“Cardel” or “Protestant”). The Protest and AFR concern the classification under the Harmonized Tariff Schedule of the United States (“HTSUS”) of lamination press plates and their country of origin. The AFR was forwarded to this office for consideration. No samples were provided for examination. FACTS: The subject merchandise is described as a lamination press plate used in the manufacture of polyvinyl chloride (PVC) smart cards, credit cards, and similar…
N301037 · 2018-11-07 — The tariff classification of steel doctor blades from Italy
The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various chemistries and dimensions. It is stated to be cold-rolled in Sweden and shipped to Italy where the edges are ground. The final product has a ceramic coating and is shipped from Italy to the U.S. In accordance with the definitions of steel in Section XV, Harmonized Tariff Schedule of the United States (HTSUS), the chemistries are described as PS1 which is a nonalloy steel, PS2 and PS4 which are tool steel, PS3 which is an other alloy steel…
N238789 · 2013-03-22 — The tariff classification of decorative plastic and metal laminates from Canada.
Representative samples were included with your submission and will be retained by this office. The items under consideration are described as decorative plastic and metal laminates for both residential and commercial use. You state that these laminates are suitable for application to interior surfaces where a decorative wear stain and impact resistant surface is required such as countertops, tabletops, cabinets, furniture, etc. The plastic laminates are sheets made of plain, colored or decorative paper coated or impregnated with melamine-formaldehyde resins which are pressed together with…
h84171 · 2001-08-09 — The tariff classification and country of origin of cold-rolled flat-rolled stainless steel produced from hot-rolled stainless steel coils from various countries, including France, Spain, Japan, Korea, Taiwan and South Africa.
You also ask about the country of origin of the product that is imported into the United States. The products to be imported are cold-rolled flat-rolled stainless steel products in coil and cut-to-length form. These flat-rolled products range from 50 mm to 1219 mm in width and from 0.25 mm to 2.0 mm in thickness. Some of the products will have a No. 2B or No. 2D unpolished cold-rolled finish and some will have a No. 3 or No. 4 polished finish. The applicable subheading for the cold-rolled flat-rolled stainless steel products measuring 600 mm or more in width and measuring over 1 mm but less…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product