Other: — Of a thickness of 4.75 mm or more
Part of: 722691 — Other: — Not further worked than hot-rolled:
N340819 · 2024-06-26 — The tariff classification, country of origin for marking purposes, and country of origin for purposes of Applicability of Section 232 of alloy steel plate
The product to be imported is identified as Invar 36 steel plate which will be used in the semiconductor industry as parts of machines that manufacture microchips. This hot-rolled alloy steel plate, which has been annealed and shot blasted, measures 4.56” (115.82 mm) in thickness, 11” (279.4 mm) in width, and 16” in length. Flat-rolled products are defined in Chapter 72, Note 1(k) as “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least 10 times the thickness or if of…
N275246 · 2016-05-27 — The tariff classification of steel plate from Japan
The products you intend to import are described as steel plate which has been hot rolled directly into flat plate and is not in coil form at any time during the processing. The plates are further described as being produced to random lengths with the intent that your customers will further process them to the desired lengths. According to your submission, the plates must be cut or worked in the U.S. before final sale in order to be used. The dimensions of the plate is stated to be between 28mm and 135mm in thickness; between 410mm and 610mm in width; and, between 2 meters and 3.6 meters in…
I82305 · 2002-06-13 — The tariff classification of steel circles from Belgium.
, you requested a tariff classification ruling. The products to be imported are 9 percent nickel alloy steel circles and test coupons. The steel circles or circle blanks and the test coupons are cut from hot-rolled steel plate made to ASTM Specification A 353. ASTM Specification A 353 is the Standard Specification for Pressure Vessel Plates, Alloy Steel, 9 Percent Nickel, Double-Normalized and Tempered. The plate ranges from 0.341 inch to 0.925 inch in thickness. The test coupons are rectangular in shape. The circles range from 76 inches to 125 inches in diameter and the test coupons…
h88697 · 2002-03-20 — The tariff classification of alloy steel plate from France.
, you requested a tariff classification ruling. The product to be imported is described as SP300 steel manifold material. The SP300 is a cast rectangular plate, which has been hot-rolled to the required thickness, subsequent to the casting process. Metallurgical defects are removed from the edges of this plate by saw cutting, and no further working is performed prior to importation. The plate will be imported in a variety of sizes with thicknesses ranging from 45 to 175 mm and widths ranging from 360 to 1220 mm. The lengths of these materials will also vary. Based on the chemical composition…
E82976 · 1999-06-17 — The tariff classification and status under the North American Free Trade Agreement (NAFTA), of alloy steel and alloy tool steel plate from Canada; Article 509
, you requested a ruling on the status of alloy steel plate from Canada under the NAFTA. Hot-rolled flat-rolled alloy steel (AISI 4140 and AISI P20 having a carbon content of less than 0.3 percent) and alloy tool steel (AISI A2, AISI D2 and AISI P20 having a carbon content not less than 0.3 percent) plates ranging from 0.5 inch to 16 inches in thickness, from 40 inches to 80 inches in width and from 120 inches to 160 inches in length are produced in various European countries and imported into Canada. These hot-rolled alloy steel and alloy tool steel plates are classified under heading 7225,…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product