Of ball-bearing steel
Part of: 72285010 — Of tool steel (other than high-speed steel)
N303387 · 2019-03-28 — The tariff classification of steel bars from Germany
The products under consideration are described as Grade 100 CR6 alloy steel bars. According to your submission, this merchandise is cold-drawn from hot-rolled coils to a diameter of 7.28 mm, cut to a length of 3,000 mm, checked for surface defects, chamfered on both ends to remove burrs and bundled. The chemistry of the bars is stated to be: C: 0.93-1.50%, Si: 0.15-0.35%, Mn: 0.25-0.45%, P: max. 0.025%, S: max. 0.015%, Cr: 1.35-1.60%, Mo: max. 0.10%, Al: max. 0.05%. The applicable subheading for the steel bars with a carbon content of 0.95% to 1.13%, a silicon content of 0.18% or more and a…
N300385 · 2018-09-27 — The tariff classification of bearing quality wire rods from Japan
The products under consideration are three varieties of Grade SAE 52100/JIS SUJ2 bearing quality steel wire rods with a minimum silicon content of .15% and a maximum silicon content of .35%. Although these rods are all imported in irregularly wound coils and are identical in chemistry, they differ with respect to their sizes and methods of manufacture. According to your submission, the three types of rods you plan to import are: hot-rolled rods with diameters ranging from 5.0 mm - 15.5 mm; hot-rolled, spheroidized annealed and phosphate coated rods with diameters ranging from 4.5 mm - 15.5…
M86791 · 2006-10-05 — The tariff classification of steel shafts from Japan.
The product to be imported is described as cold drawn centerless ground rod and bar stock. Cut to length, with diameters ranging from ¼” to 2”, these steel shafts are available in four different chemistries. The stainless product is the equivalent of AISI 440C, the alloy product, also referred to as SUJ2, is the same as AISI 52100 and the carbon products meet the specifications for either AISI 1045 or 1060. Each of these is also available with a chrome plating. All of these products will ultimately be used as guide shafts in hydraulic and pneumatic cylinders in linear machines. The applicable…
K89814 · 2004-10-26 — The tariff classification of metal shafts, metal shafts with machining, shaft rail assemblies, linear motion systems and a Dixie-elevator dispenser from Mexico
The articles in question are metal shafts, metal shafts with machining, shaft rail assemblies, linear motion systems and a Dixie-elevator dispenser. Descriptive information was submitted. The metal shafts are solid or lightweight tubular straight circular rods made of bearing-quality, high carbon alloy or 440C, 440EH (extra hard) and 300 series stainless steel materials. The shafts are hardened and precision-ground and have chamfered ends. Various types of plating are available for coating the high carbon steel products. The shafts are machined to antifriction bearing specifications and…
I82932 · 2002-07-08 — The tariff classification of precision ground steel flat bar from England.
The product to be imported is described as AISI Type 01 cold work alloy tool steel precision ground flat stock. The chemical composition meets the Chapter 72 Additional U.S. Note 1. (e)(iii) definition for tool steel. This flat stock is produced from hot-rolled material that has been ground to size using precision surface grinders. It will be imported in standard lengths of 18 inches and 36 inches and in various widths and thicknesses. Some typical dimensions are 1/64” x ½” x 18” or 36” and 2” x 12” x 18” or 36”. Flat-rolled steel products are defined in HTS Chapter 72 Note 1. (k) as “Rolled…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product