Other: — With a maximum cross-sectional dimension of less than 18 mm: — Other
Part of: 72285010 — Of tool steel (other than high-speed steel)
N303387 · 2019-03-28 — The tariff classification of steel bars from Germany
The products under consideration are described as Grade 100 CR6 alloy steel bars. According to your submission, this merchandise is cold-drawn from hot-rolled coils to a diameter of 7.28 mm, cut to a length of 3,000 mm, checked for surface defects, chamfered on both ends to remove burrs and bundled. The chemistry of the bars is stated to be: C: 0.93-1.50%, Si: 0.15-0.35%, Mn: 0.25-0.45%, P: max. 0.025%, S: max. 0.015%, Cr: 1.35-1.60%, Mo: max. 0.10%, Al: max. 0.05%. The applicable subheading for the steel bars with a carbon content of 0.95% to 1.13%, a silicon content of 0.18% or more and a…
N300385 · 2018-09-27 — The tariff classification of bearing quality wire rods from Japan
The products under consideration are three varieties of Grade SAE 52100/JIS SUJ2 bearing quality steel wire rods with a minimum silicon content of .15% and a maximum silicon content of .35%. Although these rods are all imported in irregularly wound coils and are identical in chemistry, they differ with respect to their sizes and methods of manufacture. According to your submission, the three types of rods you plan to import are: hot-rolled rods with diameters ranging from 5.0 mm - 15.5 mm; hot-rolled, spheroidized annealed and phosphate coated rods with diameters ranging from 4.5 mm - 15.5…
I82932 · 2002-07-08 — The tariff classification of precision ground steel flat bar from England.
The product to be imported is described as AISI Type 01 cold work alloy tool steel precision ground flat stock. The chemical composition meets the Chapter 72 Additional U.S. Note 1. (e)(iii) definition for tool steel. This flat stock is produced from hot-rolled material that has been ground to size using precision surface grinders. It will be imported in standard lengths of 18 inches and 36 inches and in various widths and thicknesses. Some typical dimensions are 1/64” x ½” x 18” or 36” and 2” x 12” x 18” or 36”. Flat-rolled steel products are defined in HTS Chapter 72 Note 1. (k) as “Rolled…
E85617 · 1999-09-14 — The tariff classification of forged steel blocks from France.
, you requested a tariff classification ruling. The products to be imported are P20 S (Superplast) alloy tool steel forged blocks that range from 30 inches to 60 inches in thickness, from 80 inches to 100 inches in width and up to 120 inches in length. These forged blocks have been heat-treated, pressed and machined and will ultimately be used to make finished molds for plastic injection machines. The applicable subheading for the alloy tool steel forged and machined blocks will be 7228.50.10, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of…
E82976 · 1999-06-17 — The tariff classification and status under the North American Free Trade Agreement (NAFTA), of alloy steel and alloy tool steel plate from Canada; Article 509
, you requested a ruling on the status of alloy steel plate from Canada under the NAFTA. Hot-rolled flat-rolled alloy steel (AISI 4140 and AISI P20 having a carbon content of less than 0.3 percent) and alloy tool steel (AISI A2, AISI D2 and AISI P20 having a carbon content not less than 0.3 percent) plates ranging from 0.5 inch to 16 inches in thickness, from 40 inches to 80 inches in width and from 120 inches to 160 inches in length are produced in various European countries and imported into Canada. These hot-rolled alloy steel and alloy tool steel plates are classified under heading 7225,…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product