Other: — With a maximum cross-sectional dimension of 18 mm or more: — Of round or rectangular cross section with surfaces ground, milled or polished
Part of: 72285010 — Of tool steel (other than high-speed steel)
N326109 · 2022-06-06 — The tariff classification of alloy steel bars from China, Ukraine or Slovenia
The products under consideration are precision ground alloy steel flat bars. Available in Grades A2, S7 and 01 tool steel and Grade 4140 alloy steel, these cut-to-length bars will ultimately be used in the manufacture of tools, dies and molds. According to your submission, the tool steel bars will measure 2 inches (50.8 mm) in thickness whereas the alloy steel bars will have a thickness ranging from 0.0625 inch (1.58 mm) up to and including 2 inches (50.8 mm). You indicate that these bars will be imported in widths ranging from 0.50 inch to 12 inches (12.7 mm to 304.8 mm). Flat-rolled…
N306038 · 2019-09-16 — The tariff classification of A9 tool steel bars from China, Ukraine or Slovenia
, you requested a tariff classification ruling. The items in question are two types of A9 tool steel annealed round bars. Although both products are available in lengths of 8-16 feet, the centerless ground bars will measure 0.5 inch (12.7 mm) in diameter, whereas the surface milled bars will have a diameter of 7 inches (177.79 mm). You indicate that this merchandise will be used in the manufacture of dies. The applicable subheading for the bars with a diameter of 12.7 mm will be 7228.50.1020, Harmonized tariff Schedule of the United States (HTSUS), which provides for Other bars and rods of…
I86112 · 2002-10-06 — The tariff classification of tool steel bars from Austria and Sweden.
The products to be imported are AISI Types M1 and M42 high-speed steel and AISI Type D2 and Rico Specification 72 tool steel bars. The Rico 72 tool steel contains 1.10% maximum carbon, 12.5% maximum chromium and 9.75% maximum molybdenum. The steel bars are hot-rolled, machined to specific sizes and cut to length. Both flat bars and rounds will be imported. Some of the flat bars meet the definition for flat-rolled products in HTS Chapter 72 Note 1. (k): “Rolled products of solid rectangular (other than square) cross section…in the form of…straight lengths…if of a thickness of 4.75 mm or more…
I82932 · 2002-07-08 — The tariff classification of precision ground steel flat bar from England.
The product to be imported is described as AISI Type 01 cold work alloy tool steel precision ground flat stock. The chemical composition meets the Chapter 72 Additional U.S. Note 1. (e)(iii) definition for tool steel. This flat stock is produced from hot-rolled material that has been ground to size using precision surface grinders. It will be imported in standard lengths of 18 inches and 36 inches and in various widths and thicknesses. Some typical dimensions are 1/64” x ½” x 18” or 36” and 2” x 12” x 18” or 36”. Flat-rolled steel products are defined in HTS Chapter 72 Note 1. (k) as “Rolled…
I81881 · 2002-06-11 — The tariff classification of tool steel bar from Brazil and Taiwan.
A representative sample of the product to be imported was submitted with your request. The products to be imported are alloy tool steel round bars. The bars range in size from 3 inches to 9 inches. These bars are hot forged and then peeled to remove surface imperfections and to size the bars to precise measurement specifications. Representative mill certificates from both the Brazilian and the Taiwanese mills were submitted. AISI Type H13 tool steel round forged-spheroidized-peeled 4 ¼ inch bars are described on the Brazilian mill certificate. Specification A 681 is shown on this mill…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product