Other: — With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
Part of: 72285050 — Other
N326109 · 2022-06-06 — The tariff classification of alloy steel bars from China, Ukraine or Slovenia
The products under consideration are precision ground alloy steel flat bars. Available in Grades A2, S7 and 01 tool steel and Grade 4140 alloy steel, these cut-to-length bars will ultimately be used in the manufacture of tools, dies and molds. According to your submission, the tool steel bars will measure 2 inches (50.8 mm) in thickness whereas the alloy steel bars will have a thickness ranging from 0.0625 inch (1.58 mm) up to and including 2 inches (50.8 mm). You indicate that these bars will be imported in widths ranging from 0.50 inch to 12 inches (12.7 mm to 304.8 mm). Flat-rolled…
N314570 · 2020-09-29 — The tariff classification of various steel bars from China, Ukraine or Slovenia
The products in question are various cold-finished round bars. According to your submission, these bars will be imported in stainless steel grades 440C and 420 ESR and alloy steel grades L6 and Cru501. Although each of these steels are referred to as tool steel in the furnished spec sheets, they do not meet the chemical requirements of a tool steel as defined in Chapter 72, Additional U.S. Note 1(e). You indicate that the stainless steel bars will have a diameter of either 12.70 mm or 101.60 mm, while the alloy bars will measure either 50.80 mm or 101.60 mm. In addition, you state that both…
N306392 · 2019-09-25 — The tariff classification of hexagonal bars from the United Kingdom
This replaces Ruling Number N305602, dated August 27, 2019, which contained an error with regard to the product’s chemical composition. A complete corrected ruling follows. In your letter dated August 2, 2019, on behalf of Wyandotte Industries, Inc., you requested a tariff classification ruling. The products to be imported are cold-drawn hexagonal shaped steel bars made to ASTM A29, Grade 1137 chemistry and containing: carbon (0.32% - 0.39 %), manganese (1.35 - 1.65%), phosphorous, max (.040%) and sulfur, max (0.08% - 0.13%). These bars will be imported in lengths of 12 feet and are available…
N305602 · 2019-08-27 — The tariff classification of hexagonal bars from the United Kingdom
, you requested a tariff classification ruling. The products to be imported are cold-drawn hexagonal shaped steel bars. Made to ASTM A29, Grade 1137 chemistry, these bars will contain manganese in the amount of 1.35% - 1.65%. According to your submission, this merchandise will be imported in lengths of 12 feet and is available in 4 different size designations: 2.750” Hex, 3.125” Hex, 3.500” Hex and 4.000” Hex. You suggest classification of the subject products in subheading 7215.10.0080, Harmonized Tariff Schedule of the United States (HTSUS) which is a nonalloy steel provision. However, in…
966169 · 2003-04-08 — Steel Bars with Chamfered Ends for use as Precision Linear Shafts;
We have considered this submission as a request for reconsideration of New York Ruling letter (NY) I85075, dated September 19, 2002. Your letter was forwarded to this office for reply. A sample was provided for our examination. After review of NY I85075, Customs and Border Protection (Customs) has determined that the classification of the chamfered precision linear shafts under subheadings 7215.50.00, 7222.20.00, 7228.50.50, HTSUS, is correct. FACTS: In NY I85075, in response to your classification request, certain nonalloy steel bars of circular cross section were classified under subheading…
Not sure this code fits your product? HaiLang AI determines the US HTS code from a description in about a minute.
Classify a product